38
Replace the lid gasket
The lid gasket ensures that the vacuum chamber is completely closed during the machine
cycle. This is essential for achieving a maximum vacuum. The lid gasket wears due to the
extreme pressure differences and must be replaced regularly. Inspect the lid gasket weekly
for tears or damage. Replace the lid gasket at least once every 6 months.
Remove the old gasket rubber from the holder.
Cut a new piece of rubber of the same size as the old one. When the lid rubber is too
short or too long it can cause problems closing the lid or leak.
Replace the new piece of gasket by pressing it into the lid. The lip of the gasket
should be pointing down and outwards.
The rubber must be placed evenly and without tension in the holder. The ends must
be cut straight and must be laid tightly against each other to avoid leakage.
Содержание Lynx 32
Страница 1: ...User manual Lynx 42 Lynx 32 L ENG C...
Страница 42: ...42 Electrical diagram Lynx 32 42 main circuit diagram...
Страница 43: ...43 Electrical diagram Lynx 32 42 control diagram...