Henkelman Lynx 32, Руководство пользователя, Страница: 30 / 48

30
Important before maintenance
 If the machine is not functioning properly or if it produces strange noises, turn it off
immediately with the On/Off switch and contact the supplier.
 If the machine is equipped with a gas flush system, always close the main valve at
the bottle during standard maintenance activities. When cleaning the transparent lid,
never use cleaning agents containing solvents. Check at least once a week if there
are cracks in the lid. In case of cracks, turn off the machine immediately and contact
the supplier.
 Major services must always be carried out by an authorised supplier.
Oil maintenance
Oil Cleaning Program
Use the control panel to select the pump cleaning program (‘up’▲ or
‘down’▼). The program lasts 15 minutes and it is advisable to run it at
least once a week. The program runs automatically after closing the lid.
If necessary the program can be interrupted at any time using the
[STOP] key.
Use the conditioning program at least once a week to enhance correct and long-lasting pump
operation. It is also advisable to run the program before using the machine for the first time
and after the machine has been stationary for a lengthy period of time.
Oil maintenance

Check before starting the machine the oil in the pump. If there is too little oil or the
quality of the oil is bad (unclear), replace or refill the oil before operating the
machine.
 Always change the oil before a long period of inactivity of the machine and make
sure the pump is clean and free of moisture.
Changing Oil / Filling Up
Draining oil
If the oil is white or unclear when checked then it must be replaced. Before draining off the oil
let the conditioning program run a full cycle. The dirt and moisture will be absorbed by the oil
and the oil becomes thinner making draining easier. After the program has ended the oil