Henkelman Lynx 32, Руководство пользователя, Страница: 24 / 48

24
 To place a roll of labels in the machine. Pull the green levers on the side forwards
and open the lid. Remove at least two labels from the backing foil. Push the roll
carriers outside and place the roll between them. Then pull the dispenser down to
create an opening. Now lead the label foil as shown in the picture.
 Close the dispenser if the label foil is correctly placed.
 Now close the lid and push the green button on top once. The printer now
automatically goes to the next label.
 When using a different length of label, you have to recalibrate the printer. The above
steps are equal. Just hold the green button till the light under the button blinks twice.
Now the sensors register the length of the new label.
 For activating the printer and changing the setting, check the chapter ‘Settings’.
It is not possible to change the type of font or font size of the printed text on the label. Using
a label with a different size as the supplied label, might result in a situation where the printed
text will be unreadable.
The setting of the printer is based upon a label roll that has separate labels. The free space
between two labels is used to determine the length of the label. Using a printer roll without
these free spaces will not work before the printer settings have been changed. Please review
the Printer manual.