Henkelman Lynx 32, Руководство пользователя, Страница: 37 / 48

37
Replace the rubber in the silicone holder
The silicone holder must be inspected weekly for irregularities on the silicone rubber (mainly
caused by burning by the sealing wire). If irregularities appear then the silicone rubber must
be replaced.
 Remove the old silicone rubber from the holder.
 Cut a new piece of silicone rubber to the same size as the old one. The same size is
very important, too short or too long will cause problems with sealing.
 Place the new piece in the silicone holder. Ensure that the silicone rubber is
completely and evenly placed in the groove. It is also important that the surface of the
silicone rubber is smooth after it is in place and doesn’t show any signs of tension.