13 Access Control (if installed)
Integrated Electronic Access Control limits user access, providing secure storage. A valid personal identification
number (PIN) must be entered to open the unit.
Notes
•
There is a lock override key on Helmer equipment. The key disconnects power to the magnetic lock, allowing users to
access the contents of the cabinet. A keyed mechanical lock is provided on the door to allow secure access if the
magnetic lock is overridden.
•
In the event of an AC power failure, the magnetic lock override key should be switched to override position and the
mechanical key lock should be used to provide secure access until AC power is restored.
•
Refer to the product operation manual for detailed instructions on using the Access Control lock under normal
conditions and during an AC power failure.
Access Control Setup
The Access Control Setup screen allows management of multiple user profiles. Up to 100 user profiles can be
created.
Notes
•
Access Control must be set up prior to use.
•
The Supervisor PIN must be used to set up user profiles.
•
The Supervisor PIN does not allow access to the unit. At least one user ID must be set up to gain access to the unit.
•
The Supervisor PIN should be changed to prevent unauthorized user ID setup. The Supervisor PIN can not be deleted.
•
In the event the Supervisor PIN is unavailable, contact Helmer Technical Service to reset the Supervisor PIN.
Note
The
Access Setup
button can be found on the
Users and Passwords
screen or the
Access Log
screen.
Entry into Access Control Setup
1. Touch the
Access Setup
button. A numeric keypad is displayed.
2.
Enter the supervisor PIN
(if entering for the first time, use the factory supervisor PIN = 5625)
.
3.
Touch
to confirm. The keypad closes and the Access Control Setup screen is displayed.
Add a user profile
1. Touch the
Add User
button. An alphanumeric keyboard is displayed.
2.
Enter the User ID for the new user profile.
3.
Touch the
to store the user ID. The alphanumeric keyboard is displayed.
4.
Enter a 4-digit PIN for the new user profile.
5. Touch the
to store the user PIN. The User ID and PIN for the new user profile are displayed in the table.
Helmer Scientific
i.C
3
User Guide for i.Series Incubators
360406/A
37
