Downloading Temperature Graphs and Alarm Event Data to PDF
Use the PDF Download screen to download information to PDF (Portable Document Format).
1.
Insert a memory device into the USB port located on the right of the i.C
3
monitor bezel. When the memory device is
detected, the message
"Insert USB Flash Drive"
clears. The
Start Download
and
Data Selection
buttons are no
longer shaded.
2. Touch the
Date Range
buttons to select the desired beginning (left) and ending (right) dates. The Data Report Calendar
screen is displayed for each date.
3.
Touch the desired date on the calendar, then touch the
to confirm, or the
to cancel.
4.
Select the desired Report Duration.
•
1-day duration selects all applicable one-day graphs and Alarm Event Data reports for the product and date range.
•
7-day duration selects all applicable seven-day graphs and Alarm Event Data reports for the date range.
•
All duration selects all the applicable one-day and seven-day graphs and Alarm Event Data reports for the date range.
5. Touch the
Start Download
button to begin the download. The Download Status bar becomes active showing
the progress of the download. When finished, the message
"Data download complete"
along with the number of files
downloaded. A date and time stamp will appear below the completion message.
6.
Remove the memory device from the USB port. The PDF file may be saved or printed from a PC. If the memory device
is removed before the download is complete, the message
"Flash drive has been removed"
will appear below the
progress bar. If the memory device is full, the message
"Flash drive is full"
will appear below the progress bar.
Notes
•
If the PDF Download icon is touched before a memory device is inserted, the message "Insert USB Flash Drive" is
displayed until a memory device is inserted.
•
The paper setting selected is stored with the report being run and cannot be changed when rerunning the same report
at a later date. Changing the paper setting will affect the current report being run as well as subsequent reports.
•
PDF reports are stored for about 3 months, at which time the oldest reports are purged to free up storage space.
Helmer recommends performing PDF downloads every two months.
Helmer Scientific
i.C
3
User Guide for i.Series Incubators
360406/A
24
