27
INSTALLATION FITTING ASSEMBLIES
1
102141
Nut 1” Quick Connect
2
102437
Split Ring
3
102165
O-Ring 215
The nuts and caps are designed to be unscrewed or tightened by hand or with the special plastic wrench. If necessary a pliers can be used to
unscrew the nut or cap. Do not use a pipe wrench to tighten or loosen nuts or caps. Do not place screwdriver in slots on caps and/or tap with a
hammer.
Do not use vaseline, oils, other hydrocarbon lubricants, or spray silicone anywhere. Teflon tape must be used on threads of the 1” NPT connection
and on the threads for the drain line connection. Teflon tape is not necessary on the nut connection nor caps because of o-rings seals.
101639 - Fitting 1” PVC Male NPT
ITEM NO. ORDER NO. DESCRIPTION
101640 - Fitting 3/4” & 1” PVC Solv 90
108618 - Fitting 1” Brass Sweat
108617 - Fitting 3/4” Brass Sweat
101643 - Fitting 1” Male NPT
101644 - Fitting 1-1/4” Male NPT
110135 - Fitting 3/4” Brass Sharkbite
1
2
3
110136 - Fitting 1” Brass Sharkbite
1
2
3
