HEK MSHF, Руководство пользователя

Страница: 50 / 84

ASSEMBLY AND ANCHORING
6-14 MSHF • 7295-026A
6.4 Assembly of the mast
If work has to be stopped, always
complete the phase being
worked on. Tighten all the bolts
used for the last attachment and
switch off and secure the main
switch so that the machine
cannot be operated.
As the assembly proceeds,
place the anchor tubes, anchors
and cable guides as described
in section 6.5
Note that the power supply
consists of
3 x 400 V + n safety
earth.
The mast(s) must always be
assembled vertically.
In winds of strengths above
6 Beaufort (12,5 m/s) (41 ft/s) the
machine may not be assembled.
1. Connect the power supply to the
machine.
2. Set the main switch in position I or II
(the position depends on the
direction of phase rotation of the
power supply). If the display shows
code 02 and the phaselight on the
phaseguard relay does not burn, set
the main switch in the other position.
The display must show code 00 and
the phase light will be burning.
Fig.6-31 Power supply
Fig.6-32 Main switch