61
PARTS REQUIRED:
EAVE WALL L.H. DOOR
3" (7,6 cm)
x5
Center door in wall panel opening.
Hold door in position and keep level.
Install door with black-painted hinge board.
FINISH
Your single door is now installed.
3
2
3" (7,6 cm)
Screws into the wall
support and foor frame.
4
Screw hinge boards into wall supports and floor using (5) 3" screws as shown.
Make sure screws go into framing and foor
(Fig. D, Fig. E)
.
5
Measure Gap
(Fig. B)
between door trim and wall panel as shown.
Hold door in position and keep level.
Hinge-board must overhang wall panel at measurement shown (Fig. C)
.
Bottom of door trim is even with wall panel, as shown.
Door
Frame
Flush
Carefully cut bottom wall frame 2 x 4 flush with door frame
using a saw
(Fig. A)
.
Be careful not to cut into floor panel!
5/8"
(1,0 cm)
5/8"
(1,6 cm)
5/8"
(1,6 cm)
5/8"
(1,6 cm)
BEGIN
1
x1
Painted
Black
on Ends
UNIVERSAL DOOR
Left
Fig. A
Angle 3" (7,6 cm)
Screw
Fig. E
Fig. D
Fig. B
3/8"
(1,0 cm)
Fig. C
5/8"
(1,6 cm)
Door trim e
ven
with panel.
