33
You have finished standing your 10' gable end wall.
FINISH
6"
(15,2 cm)
6" (15,2 cm)
2"
(5,1 cm)
Nails
Fig. C
2"
(5,1 cm)
Nail
Angle nail to hit
foor frame.
3" (7,6 cm)
Nails
1-1/2"
(3,8 cm)
Nails
Fig. D
3" (7,6 cm)
Screw
Flush
10' GABLE END WALL
2" (5,1 cm)
x27
2" (5,1 cm)
x2
3" (7,6 cm)
x1
x13
1-1/2" (3,8 cm)
PARTS REQUIRED:
3" (7,6 cm)
x10
IMPORTANT!
Determine the gable end wall you want your
double doors on.
Install this solid wall on opposite end.
2
BEGIN
Place 10' gable wall centered on floor.
1-1/2" (3,8 cm) overlap is to the top.
Secure wall with (1) 2" screw through the eave
wall panel into 8' wall bottom plate
(Fig. A)
and
top plate
(Fig. B)
.
Secure wall to bottom plate first.
1
Nail lower edge of panels to floor with 2" nails
spaced 6" apart.
Angle nails into floor frame
(Fig. C)
.
Nail 12' wall panel to 10' gable wall stud
with 1-1/2" nails spaced 6" apart.
Secure wall bottom plates to floor with 3" nails
.
ENSURE PANEL CORNERS ARE FLUSH.
Secure wall top plate with (1) 3" screw
at the corner, angled as shown
(Fig. D)
.
3
4
1-1/2"
(3,8 cm)
2"
(5,1 cm)
Screw
Fig. A
2"
(5,1 cm)
Screw
Fig. B
