35
3" (7,6 cm)
GABLE DOOR WALL
2" (5,1 cm)
x14
x2
x26
1-1/2" (3,8 cm)
PARTS REQUIRED:
3" (7,6 cm)
x8
2" (5,1 cm)
x4
2
Fig. D
Remove temporary brace.
Your 8' gable door wall is installed.
FINISH
6"
(15,2 cm)
Nail lower edge of panels to floor
with 2" nails spaced 6" apart.
Angle nails into floor frame
(Fig. C)
.
Secure 12' wall panel to 10' wall stud with
1-1/2" nails spaced 6" apart.
Secure wall bottom plates to floor with 3" nails
.
Secure wall top plates with (1) 3" screw
at both corners, angled as shown
(Fig. D)
.
3
4
1-1/2"
(3,8 cm)
Nails
3" (7,6 cm)
Screw
Place 10' gable wall on floor, centered
between installed walls.
Secure wall with (1) 2" screw through the eave
wall panel into 8' wall bottom plate
(Fig. A)
and top plate
(Fig. B)
.
Secure wall to bottom plate first.
BEGIN
1
Flush
Flush
Flush
ENSURE PANEL CORNERS ARE FLUSH.
2"
(5,1 cm)
Screw
Fig. A
Fig. B
2"
(5,1 cm)
Screw
2"
(5,1 cm)
Screw
3" (7,6 cm)
Nails
3" (7,6 cm)
Screw
Fig. C
2"
(5,1 cm)
Nail
Angle nail into
foor frame.
6"
(15,2 cm)
6"
(15,2 cm)
