HBM WE2108 Series, Справочное руководство

Страница: 57 / 72

57
WE2108
HBM A1632-2.0 en
7.4 Printing function
A printer can be connected to the serial interface of the WE2108 for outputting
the weight values. The communication uses the XON / XOFF protocol. The
interface must previously be set to the ”Printing” mode (”F_SEr” = 1 in the
ioSEt menu). The Print menu is then accessible.
The printing process is released manually by pressing the key (Print).
Further information can be printed in addition to the weight value. You select
the type of the information to be output corresponding to the following table
with the ”F_Prt” parameter (printer function):
F_Prt Print output (one line for each component)
0 Printing function deactivated
1 Measured value
2 Date; Measured value
3 Date; Time; Measured value
4 Text line; Measured value
5 Running number; Measured value
6 Date; Running number; Measured value
7 Text line; Date; Running number; Measured value
8 Text line; Date; Time; Running number; Measured value
9 Date; Time; Running number; Measured value
Tab. 6.1
The ”Text line” is user−defined. The input is possible only through a PC, for
this purpose the interface must be set to the ”Computer coupling” function
(
ioSEt / ”F_Ser” = 2). Afterwards change this setting back to ”Printing”.
The running number (counting range 0 ... 99999) is increased with each print-
out and is maintained even after the unit is switched off (from P83). A reset is
possible in the menu Add / ”Clr_P”.
The printing output depends upon the operating state of the scale and
always corresponds to the display. For example for printing function 2
there results:
Gross:
Date: 05.12.98
G 34,65 kg
Net:
Date: 05.12.98
N 34,65 kg
T 9,80 kg