HBM WE2108 Series, Справочное руководство

Страница: 39 / 72

39
WE2108
HBM A1632-2.0 en
Summing functions
Para-
meter Meaning Remarks
F_Add Switching the summing
function on/off See Section 7.7
total Indication of sum, if nec. in
two display phases for val-
ues > 5 digits
t_nbr Indication of summand
counter
clr_t Deletion of sum and
summand counter
Prtno Indication of running num-
ber for print output See Section 7.4
clr_P Deletion of running num-
ber See Section 7.4
Display lightning ON / OFF
Switch light on / off with ENTER −− see 5.1.7 ”Display ligth-
ning”
Switch unit off with ENTER −− see 5.1.1 ”Switching on
and off”
5.3 Explanations for the settings
5.3.1 Display limits
The permissible range of the display depends upon the scale standard. The
setting is made in the
Func submenu, ”trAdE” parameter.
trAdE Scale standard lower limit upper limit
0 not legal for trade −135 % nominal value 135 % of nominal value
1 OIML −2 % nominal value nominal value + 9d
2 NTEP −2 % nominal value 105 % of nominal value
5.3.2 Tare value
A switchover in the net display by means of the G/N −key is only possible
for a tare value (or manual tare value) > 0.
The operation of the tare key always triggers a taring of the applied load, that
is, subsequently the tare value equals the current gross value. By means of
the setting ”F_tAr” = 1 (menu
Func , parameter−protected) a manual tare func-
tion can be activated additionally. When the G/N −key is operated, the man-
ual tare value, which was input in the menu ”P_tAr” , is used instead of the
tared value.