HBM WE2108 Series, Справочное руководство

Страница: 30 / 72

30
WE2108
HBM A1632-2.0 en
5.2 Menu operation
5.2.1 Menu Overview
You reach the parameter menu ( MENU ) of the WE2108 by simultaneously
pressing the ENTER + UP keys. Here you can set unit function, limits, printing
logs etc. and calibrate the scale characteristic. For better overview the param-
eters are grouped in several submenus, which can be called up using the
main menu. This also offers the ”Power Off” function (see 5.1.1 ”Switching on
and off”) and parameter printing (only with active printer interface). Certain
parameters are not accessible in every operating mode of the unit, or can only
be read. In the case of legal for trade units, a concealed button which is
accessible only with the calibration mark removed must be activated for cali-
bration.
The parameter main menu consists of the following items:
Main menu item
InFO Info submenu
P_tAr Preset tare value
SEtPt Limit submenu
ioSEt Unit setting submenu
Print Printing submenu
FiL Filter submenu
Func Scale function and nominal values submenu
CAL Calibration submenu
FACt Factory setting submenu
PrtPA Printout of the unit settings
tESt Test function submenu
Count Input of the reference quantity
Add Summing function
LiGht Display lighting
−OFF− Power off
Basically a parameter setting runs as follows:
1. Activating the (main−) MENU function by simultaneously pressing ENTER +
UP . You decide for a certain submenu in the main menu.
2. The required submenu is selected with NEXT or UP and appears as short
text in the display. A small . 1 . on the left in the display indicates here that you
are still in the main menu.
3. You reach the selected submenu with ENTER . The required parameter is
selected with NEXT or UP and appears as short text in the display. The
small 2 on the left in the display indicates that you are in a submenu. CE
switches back to the main menu.
4. After pressing ENTER again the current numerical value of the parameter is
displayed. The symbols 1 and 2 appear simultaneously.
5. Should the parameter not be changed, then press CE in order to reach the
submenu again. To change the value press UP . The right number place
starts to flash at second intervals.