HBM MP70DP, Руководство по эксплуатации

Страница: 38 / 76

PME-MP70DP
38
A0658-7.3 en HBM
Control inputs and control outputs are available for the MP70DPS7 and
MP70S7 versions:
Inputs /outputs
Plug terminal 3: Here there are 4inputs available to you for controlling the
functions of the PME.
Plug terminal 4: Here there are 4 outputs available.
Group Parameter Meaning
IN/OUT
1)
Outputs
1- 4
Outputs 1 - 4 can be assigned with the following functions for
each channel:
Limit values 1 to 4, standstill, error, inactive
Mode
Out1...4
The output signal is inverted (pos.log) or not inverted (neg.­
log).
The listed functions can be freely assigned to the remote con­
trols (inputs/outputs).
Functions
Input level 0 V Input level 24 V
Taring The transition from 0 V to 24 V starts the taring process
Zero
balance
The transition from 0 V to 24 V sets the current measurement
signal to zero
PkMomMax Peak value operating mode
for PkMax
Current value operating mode
for PkMax
PkMomMin Peak value operating mode
for PkMin
Current value operating mode
for PkMin
PkHldMax PkMax and PkMin memory
contents are updated
PkMax and PkMin memory
contents are frozen
PkHldMin PkMin memory contents are
updated
PkMax memory contents are
frozen
ParaCo1 Selecting parameter sets and binary
coded inputs
ParaCo2
Parameter set ParaCo2 ParaCo1
1 0 0
2 0 1
3 1 0
4 1 1
1)
MP70DPS7 and MP70S7 only