HBM MP70DP, Руководство по эксплуатации

Страница: 58 / 76

PME-MP70DP
58
A0658-7.3 en HBM
10 Settings for PROFIBUS
10.1 PROFIBUS parameterization
The amplifier parameters are set using the keyboard or the CAN interface.
With the MP70DP, the keyboard must be used to set the PROFIBUS node
address. The PROFIBUS DP parameterization telegram defines some of the
parameters for DP transmission. If you use PROFIBUS parameterization tools
which can evaluate the GSE files of GSE Revision 1, the following parameters
are available for selection:
Parameter name Possible val­
ues
Default Meaning
Diagnosis disabled
enabled
enabled External diagnosis enabled
Data format 16‐bit integer
32‐bit integer
Floating point
16‐bit integer Defines the coding format for the
measured values
Module MP70 para­
meter
for the mathematical function of
the MP70
Module 1 parameter dependent on module type
Module 2 parameter dependent on module type
Module 3 parameter dependent on module type
Module 4 parameter dependent on module type
Module 5 parameter dependent on module type
Module 6 parameter dependent on module type
Module 7 parameter dependent on module type
Module 8 parameter dependent on module type