Haulotte HTL4014 Скачать руководство пользователя страница 58

Страница: 58 / 194

2420331560

E 04 07

TELESCOPIC HANDLERS

1.2 - OPERATIONAL CHECKS

1.2.1 - During the warm-up period

Check at the beginning of each work shift or at each change of operator:

• The heating, the defrost system and the windscreen wiper.

• Check all lighting systems for proper operation.

1.2.2 - When the engine is running

Check at the beginning of each work shift or at each change of operator:

• Boost pressure (P177).

• The transmission fluid level.

• Service brake and parking brake operation.

• Forward and reverse drive.

• Each gear.

• Steer in both directions with the engine at idling speed. Check each steering mode (forward and

reverse).

• The horn and the back-up alarm. They must be audible from inside the operator's cab with the

engine running.

• All of the boom and attachment functions should operate smoothly and correctly.

• Perform all additional checks (See Section H).

Engine explosion: Do not spray ether into the air intake when starting the engine in cold weather.
Failure to comply with these instructions could result in death or serious injury.

Keep the engine cover closed while the engine is running. Failure to comply with these instructions
could result in death or serious injury.

Содержание HTL4014



































































































































































































Результаты поиска

Содержание HTL4014

Отзывы:

Похожие инструкции для HTL4014

Бренды по названию

Популярные бренды

Haulotte HTL4014, Руководство оператора

Результаты поиска

Содержание HTL4014

Отзывы:

Похожие инструкции для HTL4014

Бренды по названию

Популярные бренды