Haulotte HTL4014 Скачать руководство пользователя страница 71

Страница: 71 / 194

2420331560

E 04 07

TELESCOPIC HANDLERS

- ATTACHMENTS

5.1 - MECHANICAL ATTACHMENT LOCKING DEVICE

• Pull the locks and disengage the locking pins from the accessory.

• Align the tool apron pin with the attachment recess by lifting and crowding (P211).

• Actuate the parking brake (P214). Leave the cab, insert the locking pins and secure them with the

retaining locks.

• If the attachment requires hydraulic control, connect auxiliary hydraulic hoses A and B.

5.2 - ADJUSTING/MOVING FORKS

Fork carriages may have different locations for positioning forks.

N.B.: A

PPLY

LIGHT

COATING

APPROPRIATE

LUBRICANT

FACILITATE

FORK

BAR

SLI

DING

To slide the forks: :

• Ensure that the fork carriage is correctly installed: see Section E.

• Lift the boom by approx. 10°, tilt the fork carriage forwards until the fork heel is no longer in contact

with the fork carriage.

• Stand next to the fork carriage to slide the fork, push it or pull it nearits pin.

If the forks must be replaced:

• Place the forks on the ground.

• Remove the fork pin.

• Replace the forks and place them in position.

• Replace the fork pins and their retaining mechanisms.

.Using forks:

• The machine's capacity and range limits change according to the forks used.

Keep the specific instructions for the forks in the manual holder situated behind the cab seat, with the
telehandler operator manual.

Содержание HTL4014



































































































































































































Результаты поиска

Содержание HTL4014

Отзывы:

Похожие инструкции для HTL4014

Бренды по названию

Популярные бренды

Haulotte HTL4014, Руководство оператора

Результаты поиска

Содержание HTL4014

Отзывы:

Похожие инструкции для HTL4014

Бренды по названию

Популярные бренды