Haulotte HTL4014 Скачать руководство пользователя страница 62

Страница: 62 / 194

2420331560

E 04 07

TELESCOPIC HANDLERS

2.6 - DISENGAGING THE LOAD

Once the load has been safely placed at the unloading point, proceed as follows:

• When the load weight is no longer resting on the forks, the boom can be retracted and/or move the

machine back from under the load if the surface so allows without changing the machine level.

• Lower the fork carriage.

• Drive the machine away from the landing point to continue work.

3 - Road operation

• Preparation:

• Empty the bucket.

• Remove any large amounts of dirt from the machine.

• Check the lights and the mirrors, and adjust them if necessary.

• Follow the recommendations in force in each country of use (registration plate, jacket, warning triangle,

first-aid kit, chocks…).

• Lower the boom. The front edge of the attachment should be approximately 30-40cm above the

ground.

• Tilt the attachment back completely.

• Place a protective cover over the front edge of the bucket; remove the carriage forks or reposition

them towards the machine and secure them to the fork carriage.

• Raise the stabilisers.

• If the rear wheels are not in line with the chassis, steer them slowly back to a neutral position.

• Actuate the road switch (P215).

• The machine is now ready for road operation.

N.B.: Ensure that you follow all local, regional and national traffic regulations.

Содержание HTL4014



































































































































































































Результаты поиска

Содержание HTL4014

Отзывы:

Похожие инструкции для HTL4014

Бренды по названию

Популярные бренды

Haulotte HTL4014, Руководство оператора

Результаты поиска

Содержание HTL4014

Отзывы:

Похожие инструкции для HTL4014

Бренды по названию

Популярные бренды