Haulotte HTL4014 Скачать руководство пользователя страница 87

Страница: 87 / 194

2420331560

E 04 07

TELESCOPIC HANDLERS

- LUBRIFICATION AND MAINTENANCE

1 - Maintenance guidelines

Perform the maintenance in accordance with the maintenance schedule set out on the following
pages.

• Adapt the frequency of maintenance according to use to obtain a maximum service life.

• Read all of the instructions in the guide before starting machine maintenance.

• Follow the machine shut-down procedure before performing any machine servicing or maintenan-

ce.

• For all checks, place the machine on flat ground, stop the engine, actuate the parking brake and

lower the equipment to the ground.

• Ensure that the machine is level so that you can obtain proper fluid readings.

• Before each level, refilling or lubrication check, you must clean the filling holes, the plugs and the

grease points.

• After lubricating the machine, actuate all functions several times to distribute the lubricants.

• Perform this maintenance procedure without any accessories.

• Check the state of the filling plug seals; do not forget to replace them.

• Maintain the machine and the equipment, especially the brakes and the steering, in good condition

to ensure your safety and to comply with the legal conditions.

• Always check the pins, the elastic rings, the fastening pins, etc… daily.

• Maintenance that is not performed correctly can damage the machine.

• Check that there are no tools or other objects in the engine compartment.

• Drain the engine after operation when the oil is hot.

• Remove the keys from the starter contactor during maintenance work.

Do not modify or alter the machine or its equipment without the manufacturer's permission.

Stop the engine before opening the cover: presence of moving parts that could cause bodily injuries.

Содержание HTL4014



































































































































































































Результаты поиска

Содержание HTL4014

Отзывы:

Похожие инструкции для HTL4014

Бренды по названию

Популярные бренды

Haulotte HTL4014, Руководство оператора

Результаты поиска

Содержание HTL4014

Отзывы:

Похожие инструкции для HTL4014

Бренды по названию

Популярные бренды