Haulotte HTL4014 Скачать руководство пользователя страница 76

Страница: 76 / 194

2420331560

E 04 07

TELESCOPIC HANDLERS

2 - Emergency boom lowering

2.1 - MANUAL BOOM LOWERING (EMERGENCY MODE)

Before any manual lowering operation :

• Retract the boom before lowering it

• Activate the parking brake and block the wheels.

If the boom cannot be retracted, check on the load capacity chart in the cab that lowering the boom
in a horizontal position is compatible with telehandler stability.

• Block the boom in position with another machine, an axle or, as a last resort, the cylinder chock.

• Unscrew completely the stop screw from the balance valve block flanged on the boom lift cylinder.

Remove the locknut and rescrew the stop screw fully into its socket (1).

• Take off the cover located under the counterweight at the back of the machine to access the valve

block.

• Unscrew slowly the cap situated on the boom lift plate (1st plate from the left) until you can see the

This operation should only be performed as a last resort as it presents a danger for the operator
(machine and load stability).

Balance valve

flanged onto the cylinder

Содержание HTL4014



































































































































































































Результаты поиска

Содержание HTL4014

Отзывы:

Похожие инструкции для HTL4014

Бренды по названию

Популярные бренды

Haulotte HTL4014, Руководство оператора

Результаты поиска

Содержание HTL4014

Отзывы:

Похожие инструкции для HTL4014

Бренды по названию

Популярные бренды