Haulotte HTL4014 Скачать руководство пользователя страница 12

Страница: 12 / 194

2420331560

E 04 07

TELESCOPIC HANDLERS

3.2 - ELECTRICAL HAZARDS

• Always check for power lines before raising the boom.

• Always wear the seat belt.

Do not hang your head, your arms, your hands, your legs or any other parts of your body out of the cab.

If the telehandler starts to tip over:

• Stay in the machine.

• Keep your seat belt fastened.

• Hold on tightly.

• Lean away from the point of impact.

Trying to escape from a tipping machine could result in death or serious injury.

• This machine is not insulated and does not

offer any protection in the event of proximity to

or contact with electrical current.

Never operate the handler in an area where overhead power lines, overhead or underground cables or
other power sources may exist without ensuring that the appropriate utility company has de-energized
the lines.

Содержание HTL4014



































































































































































































Результаты поиска

Содержание HTL4014

Отзывы:

Похожие инструкции для HTL4014

Бренды по названию

Популярные бренды

Haulotte HTL4014, Руководство оператора

Результаты поиска

Содержание HTL4014

Отзывы:

Похожие инструкции для HTL4014

Бренды по названию

Популярные бренды