Haulotte HTL4014 Скачать руководство пользователя страница 150

Страница: 150 / 194

144

2420331560

E 04 07

TELESCOPIC HANDLERS

• Clean the primary air filter's filter cartridge:

7.6 - INTERNAL COMBUSTION ENGINE

• Check the oil level:

• Open the motor cover, remove the oil gauge; the level must be situated between the two min. and max.

marks.

• If necessary, complete the oil level via the filling hole.

• Check the belt tension:

• A correct belt tension is essential to ensure that the alternator, the diesel pump and the water pump work

properly and for the service life of the collars themselves.

• A collar in bad condition must be replaced immediately.

• Open the cover:

• Pull the trigger situated on the cover (1)

• Locate the angular position of the cover, which

should be identical upon reassembly.

• Turn the cover to the right (2)

• Pull the cover to remove it

• -Turn and pull the outer cartridge.

• Clean the filter cartridge (replace it, at the latest, after

every 1000 hours of operation or once a year).

• Blow with dry compressed air (with a maximum

pressure of 5 bars) from the inside of the filter
outwards or,

• Unclog it by tapping (only in the event of an emer-

gency). In this case, do not damage the cartridge, or

• Wash it in accordance with the manufacturer's gui-

delines.

• Check that neither the cartridge filter paper (translu-

cent paper) nor the seal are damaged. Replace it/them
if necessary.

• Replace the filter cartridge.

• Reassemble the cover, checking that the dust evacua-

tion valve is directed downwards.

Check the state of the sealing ring before reassembling the cartridges. Check the state of the filter
element with a light source placed inside the cartridge. Change the cartridge if a hole is detected (by a
light ray).

Never clean the cartridge by hitting it against a hard surface or with a hot or inflammable liquid.

For the following operations, install the machine on a horizontal surface and stop the engine.

Nettoyer

Nettoyer/Remplacer

Nettoyer

Содержание HTL4014



































































































































































































Результаты поиска

Содержание HTL4014

Отзывы:

Похожие инструкции для HTL4014

Бренды по названию

Популярные бренды

Haulotte HTL4014, Руководство оператора

Результаты поиска

Содержание HTL4014

Отзывы:

Похожие инструкции для HTL4014

Бренды по названию

Популярные бренды