Haulotte Group HT21RT O, Книга по эксплуатации

Страница: 39 / 282

39 4000511390 E03.16 USA / GB
HT21RT O - HT21RT O SW - HT61RT O - HT21RT PRO - HT21RT PRO SW - HT61RT PRO -
HT23RTJ O - HT23RTJ O SW - HT67RTJ O - HT23RTJ PRO - HT23RTJ PRO SW - HT67RTJ PRO
C
Familiarization
Symbol Description
Machine switched on :
• Rapid flashing : When the platform control box has not been selected or the upper or ground emergency
stop is pressed (machine switched on but control box inactive)
• Constantly on : When the machine is switched on
Foot pedal switch :
• Constantly on : "Enable switch" pedal activated and validated
Faults :
• Rapid flashing : If a fault is active (current fault)
Overload (If machine equipped with weighing system) :
• Rapid flashing : Faulty weighing / overload system
• Illuminated in case of overload
Tilt sensor (if fitted) :
• Permanently on in case of tilting, machine folded or unfolded
Radius limitation :
• Rapid flashing : Reach limitation system fault
• Slow flashing : The machine is in the 230 kg (500 lbs) low load zone, the low load is validated and 450 kg
(1000 lbs) heavy load is selected by the selector ( 82 )
• Permanently lighted : Limit of work zone with movement cut-off or machine in 230 kg (500 lbs) low load
zone and load not validated
Europe - Australia :
• 230 kg load selected : Permanently lighted whatever the position of the machine when the 230 kg load is
validated, otherwise off
• 450 kg load selected : Permanently lighted, machine in the 450 kg zone and the 450 kg load is validated,
otherwise off
1
United States - Canada :
• 500 lbs load selected
• Permanently lighted, position of the machine in 500 lbs zone with the 500 lbs load validated
• Flashes, the machine is in the 500 lbs zone, the low load is not validated and a telescope extension or
boom lowering movement control is activated
• 1000 lbs load selected
• Permanently lighted if the machine is in the 1000 lbs zone
• Permanently lighted if the position of the machine is in the 1000 lbs zone and low load is not validated
2
Platform compen/- 10° :
• Illuminated if the angle of the platform reaches +/- 10° in relation to the horizontal and movement control
Low fuel level
Combustion engine pre-heating :
• Illuminated while engine is pre-heating
• Off if engine started and if post-heating
Engine warning :
• Lighted in case of minor engine fault (e;g. water in the diesel, clogged air filter, etc.)
• Lighted or flashing in case of fault managed by the engine ECU
Engine shutdown :
• Lighted in case of major engine fault (e.g. engine overheating, oil pressure, alternator fault, etc.)
• Lighted in case of faults managed by the engine ECU
DPF regeneration required :
• Permanently lighted if the particle filter requires regeneration with a high clogging level
3
DPF regeneration in progress, high temperature in the exhaust system ( HEST )
4
DPF regeneration inhibited
5
230 kg
500 lbs
450 kg
1000 lbs
230 kg
500 lbs
450 kg
1000 lbs
0°
0°