Haulotte Group HT21RT O, Книга по эксплуатации

Страница: 255 / 282

255 4000511390 E03.16 USA / GB
HT21RT O - HT21RT O SW - HT61RT O - HT21RT PRO - HT21RT PRO SW - HT61RT PRO -
HT23RTJ O - HT23RTJ O SW - HT67RTJ O - HT23RTJ PRO - HT23RTJ PRO SW - HT67RTJ PRO
E
Trouble shooting and diagram
Gauges out of range
Chk SP480/481
F06.03 (D)
Gauges out of range with country option CE or AS, or cuntry option ANSI and Load
Measurement option active, and basket tilt in the range (-10° ; +10°)
1 -->SP480 : Not in 1500µA 20500µA
2 -->SP481 : Not in 1500µA 20500µA
VAR[LoadGaugesOutOfRange]=1
Check SP480 and SP481 connections to ground, to U104 ECU analogue inputs
Incoh Gauges
Chk SP480/481
F06.04 (D)
SP480 measured weight and SP481 measured wieght are more more than 50 kg far
(and gauges are not out of range) with coundtry option CE or AS, or country option ANSI
and Load Measurement option Active
VAR[LoadGaugesIncoherent]=1
Check SP480 and SP481 connections to ground, to U104 ECU analogue inputs
Redo calibration
Low Power
Chk gauges supply
F06.05 (D) Lower power for strain gauges is detected low := UBATB2 basket is under 8500 mV
F07 : Sensor
Chain Alarm
Chk cable/SQ990/
991
F07.02 (D)
Cable alarm : break detected, check cable sensors SQ990/SQ991
1 --> SQ990
--> SQ991
Check connection to ground, to supply, check SQ990 and SQ991 sensor
Boom Angle Position
Chk SR38x/SQ32x
F07.04 (D)
Incoherence between boom position sensors SR380/SR381/SQ320 :
• SR381 : Detection of failling edge while SR380 = 0 (with or without boom movement)
• SR381 : Detection of raising edge while SR380 = 0 (with or without platform)
• SR380 : Detection of raising edge when boom lowering and SR381 = 0
• SR380 : Detection of falling edge when boom lowering ans SR381 = 0
• SR381 : Detection of active state while *1 (redundancy of *2 position *3)
Failure Code Description