Haulotte Group HT21RT O, Книга по эксплуатации

Страница: 155 / 282

155 4000511390 E03.16 USA / GB
Chassis and turntable
Dismantling / Reassembling wheels reducer
MS0026
13 - Assembly- Cover
1. Grease O-Ring ( 6E ) and insert into internal groove in Cover ( 6A ).
2. Assemble Disengage Cap ( 6B ) onto Cover ( 6A ) using 2 Hex Head Bolts ( 6C ). Torque bolts to
70-80 in-lbs.
N.B.-:-N
OT NECESSARY TO REINSTALL
O-R
ING
( 6K )
UNLESS DESIRED
.
3. Insert Disengage Rod ( 6D ) into hole in Cover ( 6A ) until it touches the inside of the Disengage
Cap ( 6B ).
N.B.-:-T
HE
D
ISENGAGE
R
OD CAN BE INSERTED EITHER END FIRST
.
4. Grease Face of Thrust Washer 2 and place in Cover ( 6A ) making sure that tangs on washer seat
into pockets in cover.
5. Install O-Ring Pipe Plugs ( 6F ) into Cover ( 6A ). The plugs should be hand tight.
14 - Assembly- Main Assembly
N.B.-:-A
LI COMPONENTS SHOULD RECEIVE A GENEROUS AMOUNT OF LUBRICANT OIL AS THEY ARE BEING
ASSEMBLED
.
1. Place Hub-Spindle Subassembly on the bench.
2. Grease O-Ring ( 18 ) and place it into groove of Hub ( 1D ).
3. Place Ring Gear ( 1E ) onto Hub ( 1D ). Align the 3 shipping Cap Screw Holes on Hub ( 1D ) and
Ring Gear ( 1E ).
4. Install 3 shipping Cap Screws ( 19 ) into ring gear and hub. Torque them to 15-20 ft-lbs.
5. Using appropriate tool to install Retaining Ring ( 20 ) into groove on Output Sun ( 11 ).
6. With the modified spline end facing up, place the Second Stage Sun Gear ( 11 ) into mesh with the
planet gears from the Hub-Spindle Subassembly.
7. Place Input Carrier Subassembly ( 3A ) onto Second Stage Sun Gear ( 11 ) splines. Drop Input
Sun ( 10 ) into mesh with planet gears for specifie ratios, if required. (No timing required).
8. Grease O-Ring ( 17 ) and insert into groove in Cover Subassembly ( 6 ).
9. Install Coyer Subassembly ( 6 ) into Ring Gear ( 1E ) counterbore and install Retaining Ring ( 6G )
into groove in Ring Gear ( 1E ).