Haulotte Group HT21RT O, Книга по эксплуатации

Страница: 112 / 282

112 4000511390 E03.16 USA / GB
Chassis and turntable
KUBOTA diesel engine
MS0029
3.1 - SERVICE INTERVALS
Observe the following for service and maintenance.
The lubricating oil change intervals listed in the table below are for Classes CG-4, CH-4, CI-4 and CF lubricating oil
of API classification with a low-sulfur fuel in use.
If the CG-4, CH-4 or CI-4 lubricating oil is used with a high-sulfur fuel, change the lubricating oil at shorter intervals
than recommended in the table below depending on the operating condition.
Interval Item
Every 50 hours Check of fuel pipes and clamp bands.
See note Changing engine oil (depending on the oil pan).
Every 100 hours
• Cleaning of air cleaner element.
• Cleaning of fuel filter.
• Check of battery electrolyte level.
• Check of fan belt tightness.
• Draining water separator.
Every 200 hours
• Check of radiator hoses and clamp bands.
• Replacing the oil filter cartridge (depending on the oil pan).
• Check of intake air line.
Every 400 hours
• Replacement of fuel filter cartridge.
• Cleaning of water separator.
Every 500 hours
• Removal of sediment in fuel tank.
• Cleaning of water jacket (radiator interior).
• Replacement of fan belt.
Every year
• Replacement of air cleaner element.
• Check of damage in electric wiring and loose connections.
Every 800 hours Check of valve clearance.
Every 1500 hours Check of fuel injection nozzle injection pressure.
Every 3000 hours
• Check of turbo charger.
• Check of injection pump.
Every 2 years
• Change of radiator coolant.
• Replacement of battery.
• Replacement of radiator hoses and clamp bands.
• Replacement of fuel pipes and clamp bands.
• Replacement of intake air line.
Lubricating oil :
• With strict emission control regulations now in effect, the CG-4, CH-4 and CI-4 engine oils have been developed for
use with low sulfur fuels, for On-Highway vehicle engines. When a Non-Road engine runs on high sulfur fuel, it is
advisable to use a "CF or better" classification engine oil with a high Total Base Number (a minimum TBN of 10 is
recommended).