Hasselblad 503CWD Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 82

background image

42

There is also a one-button shortcut
for deleting single images. To use
it, select a target image and then
press and hold the



until the

conﬁrm-delete dialog opens.



Delete shortcut !

Deleting images − general

The CFV enables you to delete images using any of the following techniques:

  •  Delete the currently selected image only.
  •  Delete all images from the current batch
  •  Delete all images from the current medium
  •  Delete all red-status images from the current batch
  •  Delete all red-status images from the current medium
  •  Delete all red- or yellow-status images from the current batch
  •  Delete all red- or yellow-status images from the current medium



Another way of working is to simply assign unwanted images as Red. In this way, you retain
the option (for a while) of changing your mind later while allowing the system to automati-
cally delete the unwanted images as the storage medium ﬁlls up.



You will always be asked to conﬁrm each delete operation.

For complete details about how to use the menu system to delete single or multiple im-

ages, please see

MAIN MENU > STORAGE > Delete

.

Transferring / Copying images − general

Transferring to a computer

To transfer images stored on the compact-ﬂash card to your computer, simply connect

the digital back to a computer using a FireWire cable and then run FlexColor, which will

automate the process. See your FlexColor manual for details.
See also

Connecting to the Computer

for details about how to connect to a computer.

Another way to transfer images to your computer is to remove the compact-ﬂash card

from the digital back and insert it into a compact-ﬂash card reader connected to a com-

puter. See

Using Compact Flash Memory Cards

for details about how to remove and

insert the card.

The 503CWD can also function as a CF card reader for ﬁle transferrence. Select

MAIN

MENU > SETTINGS> Misc> Interface > Disk.

Images that you have stored on an Imagebank can also be transferred to a computer by

connected the external disk to the computer with a FireWire cable and then copying the

ﬁles using the ﬁle system. See your Imagebank or hard disk documentation for details.

Transferring to an Imagebank

The CFV enables you to work in the ﬁeld, shooting to the internal card, and then transfer

images to an external hard disk even if you do not have a computer with you. In this way,

you can combine the total ﬂexibility of shooting without any external connections with

the massive storage capacity of an external hard disk.
When the internal card gets full, just connect the camera to a Imagebank, transfer the

images, clear the card and return to shooting.
Images are not automatically deleted from the card after copying. If you want to delete

some or all images to free up some space, then use

MAIN MENU > STORAGE > Delete

.

See also

MAIN MENU > STORAGE > Delete

.

«
...
40
41
42
43
44
...
»

Содержание 503CWD



















































































Отзывы:

Нет отзывов

Похожие инструкции для 503CWD

Бренд: Tamron Страницы: 2

Бренд: Harbor Freight Tools Страницы: 3

Бренд: Canon Страницы: 115

PowerShot ELPH 520 HS

Бренд: Canon Страницы: 117

Бренд: ZEROXCLUB Страницы: 25

Бренд: Hama Страницы: 2

Бренд: WildSpot Страницы: 12

Бренд: Olympys Страницы: 13

BlackSys CW-100

Бренд: CammSys Страницы: 28

Бренд: PMD Страницы: 8

Бренд: OPTRON Страницы: 36

Бренд: Hi Sharp Страницы: 3

Бренд: Pentax Страницы: 7

Бренд: National Geographic Страницы: 132

Бренд: Foxtech Страницы: 25

Бренд: V7 Страницы: 16

Бренд: Orion Technology Страницы: 4

6.0 Mega CD310C3

Бренд: Cobra Digital Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды