Hasselblad 503CWD Скачать руководство пользователя страница 21

Страница: 21 / 82

Ready light indicator 6

Flashes yellow to indicate that the digital back is performing an

operation and is not available for new commands. Flashes green

when the back is ready.

Digital back retaining hook slots 7

Accepts digital back/magazine retaining hooks on camera body.

CCD and IR ﬁlter 8

This is the light-sensitive element, which is positioned behind a

permanently mounted IR ﬁlter. Usually, this assembly will either

be inside the camera or protected by the cover. Always be very

careful not to touch or scratch the surface of the ﬁlter when it is

exposed and to replace the plastic cover whenever the digital back

is not mounted on a camera.



WARNING: never attempt to remove the glass ﬁlter—you will
probably ruin the CCD if you do so.

See ‘Cleaning the CCD’ section for details.

Databus connectors 9

For communicating with a Hasselblad ELD model camera body or

with a modiﬁed Hasselblad 202/203/205 model camera body.

Battery (not supplied) 10

7.2V InfoLithium L type (Sony NP-F550 or similar)

Zoom-in button / SELECTION (+ button) 11

Zoom-in button (to make the view larger) for the preview image.

Also acts as a selection button when viewing available

image batches, media and value setting on the menu.

Zoom-out button / SELECTION (– button) 12

Zoom-out button (to make the view smaller) for the preview im-

age. You can continue to zoom out to view several small

images at once and ﬁnally to view and select batches

and media. Also acts as a selection button for value setting on

the menu.

Instant Approval /

(OK)

button 13

This button steps through the three approval levels, thereby assign-

ing an approval status to the image currently displayed

(or selected) in the preview screen (part of the Instant

Approval Architecture system). The colour coding is based on the

traﬃc signal convention of green, amber (yellow) and red.
Also acts as a conﬁrmation button (OK button) for some types

of menu operations, such as deleting images; indicated by a label

beside the button on the preview screen.

Navigation button 15

A four-way rocker button enabling you to step through

preview images and navigate the menu system. To use

it, press the side of the button that corresponds to what

you wish to do (e.g., move up, left, right or down).

Digital back retaining catch 16

Locks the mounted digital back onto the camera body..

Ventilator 17

Ensures the processor is kept cool.

Flash sync IN terminal 18

Used when working with studio / strobe ﬂash units. Allows con-

nection to the unit via the ﬂash sync protector cable to ensure

correct syncronisation as well as providing protection for the

digital back.

Flash sync OUT terminal 19

Used when working with studio / strobe ﬂash units. Allows con-

nection to the lens sync contact via the ﬂash sync cable to ensure

correct syncronisation

FireWire connector 20

Allows the connection to a computer or Imagebank. The digital

back requires an 800 connecter whereas the computer can be

either an 800 or 400.

Battery retaining catch 21

Ensures secure mounting of battery.

CF card slot cover 22

Protects card slot.

Winder / EL terminal 23

Terminal for connection to a Hasselblad CW winder or Hasselblad

EL model camera body. Requires the camera sync cable (sup-

plied).

Digital back support slots 24

Accepts digital back/magazine support hooks on camera body.

Содержание 503CWD



















































































Результаты поиска

Содержание 503CWD

Отзывы:

Похожие инструкции для 503CWD

Бренды по названию

Популярные бренды

Hasselblad 503CWD, Руководство пользователя

Результаты поиска

Содержание 503CWD

Отзывы:

Похожие инструкции для 503CWD

Бренды по названию

Популярные бренды