Hasselblad 503CWD Скачать руководство пользователя страница 41

Страница: 41 / 82

Battery-saver mode

In this mode, the digital back is fully responsive, so you can take pictures but the screen

is not lit up, thereby saving battery power.
You can enter the menu system while shooting in this mode (which activates the screen

until you exit the menu system again) but the approval, zoom and navigator buttons

have no eﬀect.



You can also save battery power by turning down the brightness and/or contrast of the
display using the entries of the

MAIN MENU > SETTINGS > USER INTERFACE > DISPLAY

menu. See

Making Display Settings

for details.



Other ways to save battery power include setting a display time-out and/or a power-down
time-out (each of these is disabled by default). Use

MAIN MENU > SETTINGS > USER

INTERFACE > Power Down

to set a power-down time out. Use

MAIN MENU > SETTINGS

> USER INTERFACE > DISPLAY > Timeout

to set a display time-out. See also

Entries

of the USER INTERFACE Menu

and

Making Display Settings

for details about these

settings.

Full-screen mode

In full-screen mode, you can browse your images at standard preview resolution without

any distracting data surrounding them.
Because the current approval setting is not shown in full-screen mode, the approval

button has no eﬀect. This will prevent you from accidentally assigning the wrong status

without knowing it.

Overexposure indicator

Though the histogram shows you when some of your pixels are overexposed, it does not

tell you which ones. In a shot with many bright areas, it can be hard to know whether

the key parts of your image are just bright or completely overexposed. To help you ﬁnd

them, the digital back can provide an overexposure indicator, which shows precisely

which areas of your shot are overexposed (i.e., pixels that are at maximum brightness,

thereby eliminating details).
When enabled, the overexposure indicator ﬂashes the overexposed pixels from black

to white.
To enable or disable the overexposure indicator, use the

MAIN MENU > SETTINGS >

USER INTERFACE > Mark Overexp

. entry.

Please see

Entries of the

USER INTERFACE Menu

for a detailed procedure.

There is also a one-button short-
cut for toggling the overexposure
marker on and oﬀ.
To use it, press and hold



until

the indicator is working as you
would like (enabled or disabled).



Overexposure

indicator shortcut !

Содержание 503CWD



















































































Результаты поиска

Содержание 503CWD

Отзывы:

Похожие инструкции для 503CWD

Бренды по названию

Популярные бренды

Hasselblad 503CWD, Руководство пользователя

Результаты поиска

Содержание 503CWD

Отзывы:

Похожие инструкции для 503CWD

Бренды по названию

Популярные бренды