Hasselblad 503CWD Скачать руководство пользователя | Manualshive

Страница: 22 / 82

background image

22

Although the 503 CWD digital back is primarily designed for use with the 503 CWD camera body, it
can also be used with other Hasselblad camera models as well as other camera brands that have
been ﬁtted with an adapter for mounting Hasselblad ﬁlm magazines.

This manual assumes that you are using the digital back in conjunction with the 503 CWD body
camera.

As with all digital products, it is essential that you maintain a constant check on battery condition
and preferably have a fully-charged reserve battery with you at all times when not tethered to a
computer.



CAUTION

If you remove the digital back, be very careful not to touch or scratch the CCD/ﬁlter surface
while it is exposed.

Always attach the protective cover for transportation or storage.

Powering the digital back

The digital back requires power either from the battery (7.2V Sony InfoLithium L type −

NP-F550 for example) or from a computer via a FireWire cable.

To attach a battery:

1. Firstly, ensure the battery is fully charged (see user appropriate manual for battery

and charger).

2. Position the battery as in the illustration.
3. Press the battery towards the camera. This automatically depresses the battery

retaining catch.

4. Slide the battery into the ﬁnal position ensuring the contact prongs on the camera

are inserted into the battery. The battery retaining catch will now return to the safe-
ty position

To remove a battery:

1. Depress the battery retaining catch and slide the battery over it. It will then be freely

removed.

FireWire connection:

1. Simply connect the FireWire cable between the FireWire port on the digital back

and the FireWire port on the computer. You will not need to attach a battery with a
FireWire connection.

ON / OFF button

With a fully charged battery ﬁtted or FireWire cable attached, press the ON/OFF to acti-

vate the digital back. An audible signal will be heard and a Hasselblad logo splash screen

will appear on the OLED. The back will enter standby mode after the preset time to save

the battery. Press the ON/OFF button again to turn the digital back oﬀ. An audible signal

will be heard again to conﬁrm this. However, you will not need to use this button with a

FireWire connection as the active mode is instigated automatically.





«
...
20
21
22
23
24
...
»

Содержание 503CWD



















































































Отзывы:

Нет отзывов

Похожие инструкции для 503CWD

POWER series E1480W

Бренд: GE Страницы: 87

AWHE100N - HD INTEGRATED CAMERA

Бренд: Panasonic Страницы: 42

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 100

smc Pentax-D FA Macro 100mm f/2.8

Бренд: Pentax Страницы: 12

Бренд: Targa Страницы: 386

Бренд: Navaio Страницы: 58

Бренд: 70mai Страницы: 150

LDH SAI200 Series

Бренд: Dahua Страницы: 48

Бренд: A-rival Страницы: 38

Бренд: AdView Страницы: 3

Бренд: Blaupunkt Страницы: 61

Бренд: Hama Страницы: 244

Бренд: Konica Minolta Страницы: 53

Бренд: Ability Страницы: 44

Бренд: Gator Страницы: 16

Бренд: switel Страницы: 48

AverVision 355AF

Бренд: Avermedia Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды