manualshive.com logo in svg

Harris FlexStar HDE-200, Руководство по установке и инструкция пользователя

Поделиться
Скачать
Harris FlexStar HDE-200 Скачать руководство пользователя страница 15

Revision F  •  3/12

H

A

R

R

I

S

 

C

O

R

P

O

R

A T

I

O

N

2-3

2 Hardware Installation

NOTE:

 The HDE-200 uses two IP

addresses, one for the CPU (default:

10.10.10.10), the other for the iBiq-

uity HD Radio DSP board (default:

10.10.10.22). Do not connect any

CAT-5 cables to the HDE-200’s three

Ethernet ports until after the IP ad-

dresses and other network settings are

configured. This can be done is two

ways: by following the procedure in

the Software chapter (page 3-6), or by

running the ECC app on a host com-

puter with its IP address set to the

10.10.10.x subnet in order to connect

to the Exporter.

If the subnet of the Exporter is

changed from the default, then the

Host Subnet must also be changed.

For most installations it will probably

be easier to use the HDE-200 configu-

ration method presented in the Soft-

ware chapter.

2.2 Optional Upgrade Kits

Three upgrade kits are available to expand the

HDE-200 functionality: a Profanity Delay Up-

grade (HARHDE200-PROFAN) adds the profan-

ity delay option so that a separate profanity delay

and controller are not required; an Arbitron PPM

Encoder Interface (HARHDE200-PPM) activates

the rear panel Loop Thru connection to interface

two Arbitron PPM Encoders (one for the analog

channel, the other for the HD Radio main chan-

nel); and a combined upgrade (HARHDE200-

PROF/PPM) which adds the Profanity Delay and

activates the Arbitron PPM Encoder interface.

The Profanity Delay adds a second delay func-

tion to the HDE-200—with remote studio logic

control via the Remote I-O Logic connector or via

on-screen commands, so that a separate profanity

delay controller is not required. It has variable

ramp times and allows profanity delays of up to

35 seconds to be set through the ECC app. This

delay is completely separate from—and does not

affect, the Diversity Delay built into the HDE-200.

The Arbitron PPM Encoder Interface connects

two PPM Encoders to add the People Meter sig-

nals to the main HD and analog carrier audio

streams. These are post processing and Diversity

Delay so that ramping the Diversity Delay in or

out does not affect the PPM Encoding.

The PPM Encoders connect to the HDE-200

using XLR interface cables, included in the up-

grade kit, which plug into the 

Post Delay Loop

In/Out connector. The six foot long cables plug

into the PPM Encoder’s 

In and Out connectors.

2.2.1 UPGRADE KIT INSTALLATION

Installing an upgrade

kit requires that the

HDE-200 top panel be

removed to install an

iButton which activates

the purchased option.

Power down the HDE-200, then remove 11 flat-

head Phillips screws along the edges of the cover,

and lift the cover off.

Dissipate any static charges before removing the

iButton from its antistatic packaging. Do not touch

any components inside the HDE-200, except for

the 

iButton socket, which is on the main interface

board next to the ribbon cable going to the front

iButton

Snapping the iButton into its Main Board Socket

Содержание FlexStar HDE-200
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды