LSA-10A-30-D-130 Technical Document
-30-
4-12 Driver Accessories
The accessories of the driver are as follows.
Name
Model
Quantity
Remarks
Housing for CN1
VHR-3N
（
JST
）
1
Connect for CN1
BVH-21T-P1.1
（
JST
）
3
Applicable
Wire Diameter:
AWG 22-18
Housing for CN3
ZHR-8
（
JST
）
1
Connect for CN3
SZH-002T-P0.5
（
JST
）
12
Applicable Wire Diameter:
AWG 28-26
Status of the 12 reels
(including 4 backup reels)
Note: Please utilize the appropriate tools when crimping.
4-13 Driver Labels and Descriptions
The product label and adjustment label are attached to the driver. Please refer to “Dimensions” (4-3) for
positioning of the labels.
The descriptions are as follows.
Label Title
Entry
Descriptions
Product Label
(*1)
SER
．
Product serial number of the driver.
PT
．
Management number of the product specifications.
Adjustment
Label
ADJ
．
Model of the combined adjustment LSA
SER
．
Serial number of the combined adjustment LSA
LOAD
Identification symbol of the combined adjustment load
(*2)
*1 The driver model is not listed on the product label.
Please identify the model from the silk print on the board.
*2 The descriptions of the LOAD are our adjustment specification management numbers.
Example: 101000, etc.
It is possible to use the contents specified by the customer within the limitations below. Please
contact us for the details.
•
Within 6 single bit, alphanumeric characters (without symbols)
Example: mirror / X / Y / SYS, etc.
•
The products of the same adjustment specifications will have the same descriptions.
(There is no support for serial numbers.)
•
The descriptions are limited to the contents that have been agreed upon when the
adjustment specifications documents are submitted.
