LSA-10A-30-D-130 Technical Document
-13-
2-4 Optical Scanner Operating conditions Form
Requested Date:
Company Name
Position/Title
Name
Address
TEL/FAX
TEL: /FAX:
Applications
Please check the
appropriate classification.
In addition, please enter
specific details.
Classifications
Laser Processing
Measurements
Image Processing
Laser Display
Other
Details
Please refer to the technical data in 2-3 and 2-4-1 and enter the operating conditions. Based on these conditions
we will submit the adjustment specifications, including the model selection. If necessary operating conditions are
not indicated, the appropriate adjustment specifications may not be submitted.
Operating conditions
No.
Items
Specifications
Supplementary ([ ] refers to the
technical data in 2-3 and 2-4-1)
(1)
Input Command Wave (Basic
Waves)
Rectangular Wave
Trapezoid Wave
Saw-Tooth Wave
Triangular Wave
Sine Wave
If the wave has a slope, please
attach the slope data.
(2) Emphasized Adjustment Amplitude
[°] [1] [5] Sine Wave Conditions
(3) Drive Frequency
[Hz] [4] [9] Sine Wave Conditions
(4)
Convergence criteria (positioning
accuracy)
[°] or [arc-sec]
[2] [6]
(5) Settling Time
[ms] or
[μs]
[3] Time after the input becomes
constant during trapezoid wave
drive.
(6) Range of Constant Speed
[
％
]
[7] Please also list targeted slope
during saw-tooth drive.
(7) Position Delay
[ms] or
[μs] [8] Sine Wave Conditions
(8) Amplitude Error
[
％
]
Output/Input Amplitude Error, Sine
Wave Conditions
(9) Load Moment of Inertia (GD
2
/4)
[g-cm
2
]
[10] May attach diagram (material)
as a replacement
(10) Maximum Amplitude
[°] [11]
(11) Voltage at Full Scale
Input Voltage: Amplitude during [Vp-p]: [°]
[12]
(12)
Extended Cable Distance Between
Scanner and Driver
[m] [14] No extension when blank.
(13)
Power Capacity (performance or
capacity-emphasized)
[
Ｗ
]
[15] 240W when blank. Enter
either performance or power
capacity-emphasized.
(14) Priority Characteristics
Please enter items to be
emphasized.
(15) Work (Optical Scanning) Range
[mm]
Reference Value
(16) Distance of Work and Mirror
[mm]
Reference Value
(17)
Cable Length Between Power
Source and Driver
[mm]
Reference Value
(18)
Others (including details of
adjusted stamped labels)
If the entry space is insufficient,
please attach as separate pages.
* Please list all angles as mechanical angles. * Please enter data on the copy of this form.
Space to be filled in by our company:
(Management No.: ) (Sales Branch: ) (Sales Representative: )
