Harman Studer Vista FX Скачать руководство пользователя

Страница: 53 / 56

Vista FX

Vista FX 1-37

Document generated: 28.08.14

SW V4.9

5.9 dynamic automation

Effect parameters can only be used in Static Automation mode. In the

Dynamic Automation mode, effect parameters cannot be automated against

timecode.

5.10 offline operation

Without having FX connected to the desk, it is possible to configure FX and

set its parameters using the Virtual Vista application. If FX boxes have been

connected and recoginzed on the systems there are some entries automati-

cally being written to the D950System.ini file defining the location (audio

interfaces) of the connected FX hardware. If there was no FX hardware con

nected before, the following entries define the desired interfaces.

D950System.ini

file :

[LexiconFX]
ConnectedDspCardSlot=

( DSP card slot number where the FX units are connected to. Value: 1

default is empty (0) allowing automatic decovery via D21m).

ConnectedDspCardPort=

( DSP card port number where the FX units are connected to Value: 0

default is port 0 ).

There must be at least 48 inputs and outputs configured on the port being

used for the FX connection.

This settings can also be used to configure FX hardware being connected to

the second DSP card port which has no D21m communication and therefore

cannot detect the FX boxes automatically.

Содержание Studer Vista FX

























































Результаты поиска

Содержание Studer Vista FX

Отзывы:

Похожие инструкции для Studer Vista FX

Бренды по названию

Популярные бренды

Harman Studer Vista FX, Руководство по эксплуатации

Результаты поиска

Содержание Studer Vista FX

Отзывы:

Похожие инструкции для Studer Vista FX

Бренды по названию

Популярные бренды