Harman Studer Vista FX Скачать руководство пользователя

Страница: 19 / 56

Vista FX

Vista FX 1-3

Document generated: 28.08.14

SW V4.9

introduction

Software V4.9 allows to have highest quality multi-effect units deeply inte-

grated into the Vista mixing system.

Multi-effect units are useful for any mixing application, but most importantly

for sound reinforcement and live broadcast productions. In general, multi-

effect units provide effects processing for the most commonly used time

based effects, such as : Reverb, Flange/Chorus and Delay. Studer Vista FX

is the result of a collaboration between Studer and Lexicon, which provides

broadcast quality effects-processing, controlled from the intuitive Vistonics

interface of the Vista console.

The processing is carried out in Vista FX DSP units which are linked to the

SCoreLive. These hardware units are based on the legendary Lexicon PCM96

Surround DSP-platform, and therefore provide all PCM96 Surround effect

preset categories :

• Hall & Random Hall

• Concert Hall

• Plate

• Chamber

• Room

• Dual Delay

• Random Delay

• Chorus / Flange

• Resonant Chords

• Reverse

• Pitch Shift

Vista with SCoreLive

The Vista FX units are optional hardware units which can either be part of

a newly ordered mixing system, or they can be added to any exisiting Vista

mixing system which is based on the SCoreLive DSP engine.

Vista with Performa Core

Vista mixing system based on the older Performa DSP engine cannot be

equipped with Vista FX.

Vista with Infinity Core

Vista mixing systems based on the Infinity Core can make use of the original

Lexicon PCM 96 Surround units to achive the Vista FX functionality. Two

Lexicon PCM 96 Surround units have the same FX resources as one Vista

FX unit.

Содержание Studer Vista FX

























































Результаты поиска

Содержание Studer Vista FX

Отзывы:

Похожие инструкции для Studer Vista FX

Бренды по названию

Популярные бренды

Harman Studer Vista FX, Руководство по эксплуатации

Результаты поиска

Содержание Studer Vista FX

Отзывы:

Похожие инструкции для Studer Vista FX

Бренды по названию

Популярные бренды