Harman Studer Vista FX Скачать руководство пользователя

Страница: 51 / 56

Vista FX

Vista FX 1-35

Document generated: 28.08.14

SW V4.9

5.8 snapshot operation

5.8.1

snapshots and presets

All necesarry settings to recreate any use of Vista FX can be stored is snap-

shots. In more detail, the following data is stored within each snapshot or

system preset :

* the engine setup

* patching of the effect input- and output ports

* choice of preset

* effect parameter settings of the current state

Note :

The recalling of a snapshot or a preset can change the Vista FX engine setup

if this snapshot had been previously stored with a different engine setup.

In such a case where the engine setup is changed by a snapshot, unsaved effect

parameter settings can then be overwritten.

Therefore it is important to keep in mind that the engine setup is of great

importance and should be set-up correctly at the start of a session and prefer-

rably not be changed anymore.

(Of course - a snapshot recall

undo

operation would bring back the unsaved

settings if a snapshot had been recalled by error.)

Important :

Manually changing the engine setup when the engine is in use, displays a

warning window. When performing the same change via a snapshot recall -

warninig window is displayed !

5.8.2

static automation

Global Snapshot filter

With the global snapshot filter, effect parameters can be isolated as any other

audio parameter in the system. This is done by editing the global snapshot

filter, and then touching any of the to be isolated parameter controls. Please

note that the isolation of

Category

and

Preset

parameters is always linked.

Содержание Studer Vista FX

























































Результаты поиска

Содержание Studer Vista FX

Отзывы:

Похожие инструкции для Studer Vista FX

Бренды по названию

Популярные бренды

Harman Studer Vista FX, Руководство по эксплуатации

Результаты поиска

Содержание Studer Vista FX

Отзывы:

Похожие инструкции для Studer Vista FX

Бренды по названию

Популярные бренды