Vista FX
Vista FX 1-23
Document generated: 28.08.14
SW V4.9
Mix :
Adjusts the proportion of wet (processed) signal to dry (unprocessed) signal.
Ranges from 0% (all dry) to 100% (all wet). With send-return effects, you
will leave this at 100% wet, and with insert-effects, the desired dry/wet blend
can be created.
On/Off - Copy/Paste :
Here, the effect processing of the engine is globaly switched
On
or
Off.
Please note, that the default state of the processing is
Off
!
The small Vistonics button has the function of a copy/paste button. With the
copy/paste button, effect settings can be copied from effect engine to engine
- or into the clibboard library.
Effect Parameters :
In this area, all effect parameters are displayed and can be controlled from
the Vistonics rotaries and buttons.
(Please note that a maximum of 16 parameters can be used. Some of the
original Lexicon effects have more than 16 parameters, in this case STUDER
has made the choice of the 16 most important parameters - which then can be
controlled.)
Loading a preset : To load a
Preset
, first the effect
Category
has to be chosen. With all rever-
beration effect categories, also the choice of the space size can be made. This
is done with the Vistonics element on the left side.
With the second Vistonics element, the preset can be chosen. The list of presets
which are available in the chosen category can be scrolled through with the
rotary. Once the desired preset has been found, it can be loaded by pressing
the
Load
button.
As soon as a preset is loaded, it’s control parameters are shown on the Viston-
ics area. If the user then scrolls further through the preset list, the parameters
disappear again, but they will come back when the preset loaded before (now
marked with an asteriks in front of the name *) is brought into the highlighted
area :
This is because the loaded preset remains loaded and is runnung, only until
a different preset is loaded by pressing the
Load
button.
The same behaviour applies for the
Category
control.
