Harman Kardon System 13828 Скачать руководство пользователя страница 17

Страница: 17 / 50

ENGLISH

SYSTEM CONFIGURATION

System Configuration

To resynchronize the front, center and surround
channels, follow these steps:

1. Measure the distance from the listening/

viewing position to the front speakers in
meters.

2. Measure the distance from the listening/

viewing position to the surround speakers.

3. Press the

Delay Button

4. When

FRONT L DELAY

appears in the

Main Information Display

press the

Button

5. Press the

Buttons

on the remote

to enter the distance from the front left/right
speakers to your listening position. Press the

Button

when this is complete.

6. Press the

Buttons

on the remote

so that

CENTER DELAY

appears in the

Main Information Display

and press the

OK Button

(After

CENTER DELAY

you will see

FRONT R DELAY

7. Press the the

Buttons

on the

remote to enter the distance from the center
speaker your listening position. Press the

Button

when this is complete.

8. Press the

Buttons

on the remote

so that

SURR DELAY R

and after that

SURR DELAY L

appears in the Lower

Display Line and press the

OK Button

9. Press the the

Buttons

on the

remote to enter the distance from the surround
speakers to your listening position. Press the

OK Button

when this is complete.

10. When all adjustments have been made, the
unit will return to normal operation in five
seconds.

Night Mode Settings

The Night mode is a feature of Dolby Digital that
uses special processing to preserve the dynamic
range and full intelligibility of a movie sound
track while reducing the peak level. This prevents
abruptly loud transitions from disturbing others,
without reducing the sonic impact of a digital
source. Note that the Night mode is only
available when the Dolby Digital surround mode
is selected.

To adjust the Night mode setting press the

Input Source Selector

on the front or

on the remote and select an input that is associ-
ated with a digital input and the Dolby Digital
surround mode.

Next press the

Night

button

on the remote.

When the button is pressed, the words

D-RANGE

(Dynamic Range) followed by the

current setting (MID, MAX, OFF) will appear in
the

Main Information Display

. Press the

buttons

within five seconds to select

the desired setting:

OFF

: When

OFF

is shown in the display, the

Night mode will not function.

MID

: When

MID

is shown in the display, a

mild compression will be applied.

A X

: When

MAX

is shown in the display, a

more severe compression algorithm will be
applied.

When you want to use the Night mode feature,
we recommend that you select the MID setting
as a starting point and change to the MAX
setting later, if desired.

Output Level Adjustment

Output level adjustment is a key part of the
configuration process for any surround sound
product. It is particularly important for a Dolby
Digital receiver such as the AVR, as correct
outputs will ensure that you hear sound tracks
with the proper directionality and intensity.

NOTE:

Listeners are often confused about the

operation of the surround channels. While some
assume that sound should always be coming
from each speaker, most of the time there will
be little or no sound in the surround channels.
This is because they are only used when a
movie director or sound mixer specifically places
sound there to create ambiance, a special effect
or to continue action from the front of the room
to the rear. When the output levels are properly
set it is normal for surround speakers to oper-
ate only occasionally. Artificially increasing the
volume to the rear speakers may destroy the
illusion of an enveloping sound field that
duplicates the way you hear sound in a movie
theater or concert hall.

IMPORTANT NOTE:

The output level can be

adjusted for each digital and analog surround
mode separately. This allows you to compensate
for level differences between speakers, that may
also vary with the surround mode selected, or to
increase or decrease the level of certain speakers
intentionally, depending on the surround mode
selected. Note that adjustments made for any
surround mode are effective with all inputs
associated with that surround mode.

Before beginning the output level adjustment
process, make certain that all speaker
connections have been properly made. The
system volume should be turned down at first.

For the easiest set-up, follow these steps while
seated in the listening position that will be used
most often:

1. Make certain that all speaker positions have

been properly configured for their “large” or
“small” settings (as outlined above) and turn
off the OSD system if it is in use.

2. Adjust the volume so that it is at

-15

, as

shown in the on-screen display or

Main

Information Display

To adjust and calibrate the output levels, follow
these steps. For accurate calibration, it is a good
idea to make these adjustments while seated in
your favorite listening position. As the adjust-
ment must be made for each surround mode, it
is best to select any input associated with any
Dolby Pro Logic II mode, make the adjustment
for that surround mode, then step through all
inputs you´re using (and thus through all sur-
round modes associated with the inputs) and
repeat the adjustment when any surround mode
appears that has not yet been adjusted.

1. Select any input associated with any Dolby
Pro Logic II surround mode by pressing the

Input Source Selector

until the

Pro

Logic II Surround Mode Indicator

the frontdisplay lights up.

2. Press and hold the

Tone

button

on the

remote for more than 3 seconds. The words

T-T F L 0DB

will appear in the

Main

Information Display

3. The test noise will immediately begin to
circulate in the speakers in a clockwise rotation,
pausing at each position for two seconds. As the
test noise rotates the speaker positions