Hardy 1734-WS Installation & Operation Manual
Page | 6
Chapter 1 - Overview
This manual is designed for use by installers, operators, and service personnel. It provides specifications and
procedures for linking, configuring, operating, maintaining, and troubleshooting the Hardy Process Solutions
HI1734-WS POINT I/O Weigh Scale Module. The system is used for front end signal processing of load cells and
load sensors (strain-gage type sensors) for all types of
industrial manufacturing weighing applications
through an Allen Bradley 1734 POINT I/O chassis.
Modules feature Waversaver®, C2® Calibration,
INTEGRATED TECHNICIAN™ (IT) diagnostics, and
ladder logic configurability.
1
Before using the product, be sure you understand
all cautions, warnings, and safety procedures
stated or referenced in this manual. And, to get
the best service from this product, follow the
practices recommended in this manual.
Hardy Process Solutions appreciates your business.
We welcome all corrections or suggestions for
improvement of this manual. Should you not understand any information in this manual or experience any
problems with the product, please contact our Customer Support Department at:
Phone: (858) 278-2900
FAX: (858) 278-6700
e-mail: [email protected]
Web: www.hardysolutions.com
1
Waversaver® and C2® are registered trademarks and INTEGRATED TECHNICIAN™ is a trademark of Hardy Process
Solutions.