Hardy 1734-WS Installation & Operation Manual
Page | 20
In the program Controller Organizer, find the I/O Configuration Section.
Right click on the Ethernet Module you will be installing the Point I/O under.
Select ‘New Module’ to display a list of modules.
From the Catalog list, select the 1734-AENT module. Configure the module by:
o
Enter a unique name
o
Enter an IP address (Set up the addressing for the 1734-AENT module according to the instructions
in the Rockwell manual.)
o
In the module definition, set the chassis size to the correct size for the number of modules you
have,
including
the adapter module.
o
Click OK to accept.
o
Right click on the 1734-AENT module and select ‘New Module’.
o
Select the HI 1734-WS (1-Channel Weigh Scale). This will add the new module under the AENT
adapter module
