Haojue UF115, Руководство пользователя

Страница: 94 / 168

EN
(94) Haojue UF115 99011H5A001H000 V02 ES+EN+FR 2021-4-8 10:00
it with a new one.
Whenever removing carbon deposits, be sure to observe
the operational color of the spark plug’s porcelain tip.
This color tells you whether or not the standard spark
plug is suitable for your type usage. A normal operating
spark plug should be very light brown in color.
If the
spark plug is very white or glazed in appearance, it works
under overheating conditions. This spark plug should be
replaced with a colder one.
Spark plug replacement guide
B
CAUTION
An improper spark plug may have an incorrect fit or
heat range for your engine. This may cause severe
engine damage.
B CAUTION
Use one spark plug listed below or equivalent.
Consult your Haojue dealer or a qualified mechanic
if you are not sure which spark plug is correct for
your type of usage.
NGK Remarks
CPR5EA-
9
If the standard spark plug is apt to get wet,
replace with this plug.
CPR6EA-
9
Standard.
CPR7EA-
9
If the standard spark plug is apt to overheat,
replace with this plug.
NOTE: This motorcycle uses a resistor-type spark plug
to avoid jamming electronic parts.
Improper spark
plug selection may cause electronic interference with
your motorcycle’s ignition system, resulting in motorcycle
performance problems. Use only the recommended spark
plug.
Spark plug installation
B
CAUTION
A cross-threaded or over-tightened spark plug will
damage the aluminum threads of the cylinder head.
When dismantling the spark plug, keep debris from
entering the engine via the spark plug hole.
Follow the procedure below to tighten the spark plug
properly.
Carefully turn the spark plug by hand into the threads until
it is finger tight. If the spark plug is new, tighten it with a
wrench about 1/2 turn past finger tight. If you are reusing
the old spark plug, tighten it with a wrench about 1/8 turn
past finger tight.
NOTE: Insert the plug cap completely.
(94) Haojue UF115 99011H5A001H000 V02 ES+EN+FR 2021-4-8 10:00
33