Haojue UF115, Руководство пользователя

Страница: 93 / 168

EN
Haojue UF115 99011H5A001H000 V02 ES+EN+FR 2021-4-8 10:00 (93)
1. Clean the dust on the air cleaner shell inside.
2. Reinstall the cleaned filter or new filter in reverse order
of removal. Be absolutely sure that the filter is securely
in position and is sealing properly.
B CAUTION
If any defect such as clog, damage or dust
infiltration
occurs, replace filter immediately
instead of waiting until scheduled maintenance.
B
CAUTION
If riding in dusty conditions or in moist conditions,
make the inspection and replacement intervals
for the air filter element shorter; if it is found
that the air filter element is blocked, damaged or
non-dustproof, the engine power has dramatically
declined or the fuel consumption has increased, do
not solve the problem during the next maintenance
but immediately change the air filter element. If the
engine is started when there is no air filter element,
it will wear seriously. Check the condition of the air
filter element frequently because this component
usually has an impact on engine life.
OIL COLLECTING PIPES
After the air filter is inspected,
inspect the oil collection of the oil
collecting pipes at its lower part. If
there is liquid in the oil collecting
pipes, drain it promptly with the
method below.
1. Loosen the clamp
1
.
2. Remove the oil collecting pipe
2
together with the
clamp
1
.
3. Drain all the waste liquid in the oil collecting pipe
2
.
4. Reinstall the oil collecting pipe
2
and fasten the clamp
1
.
NOTE: Be true that reinstall the collecting pipe.
NOTE: When air is very humid, properly increase the
inspection frequency.
SPARK PLUG
Spark plug inspection
0.8–0.9 mm
Measure the spark plug gap with a thickness gauge. The
standard spark plug gap is 0.8–0.9 mm. If the measured
spark plug gap is out of standard range, adjust or replace
32
Haojue UF115 99011H5A001H000 V02 ES+EN+FR 2021-4-8 10:00 (93)