HANYOUNG NUX MC9 Series, Руководство по эксплуатации

Страница: 33 / 45

33
Be
for
e s
tart
Ins
tall
Oper
ation
Func
tion
Communic
ation
█ Alarm function
• Alarm output is commonly applied to all channels. That is,
if any one of 4 channels or 8 channels satisfies the alarm output conditions, the alarm output operates.
• Hysteresis for alarm output is set to 2 ℃ (2 %).
• The standby operation alarm operates on standby in the following cases.
- When you first start operation
- When changing the target value
- When the target value is changed by changing the memory zone
※ Setting number 15 (LBA alarm) operates only in 'ALt 1'.
※ The setting range can be set within the range of -1999 to 9999.
• Setting range and initial setting value for each alarm type
Setting
number
Alarm type Setting range Initial value
0 No alarm - -
1
Deviation setting
High limit alarm
SPAN (EUS)의 ±100 %
Maximum
2 Low limit alarm
3
High/low
limit alarm
SPAN (EUS)의 0~100 %
4 In range alarm Minimum
5
Deviation setting
(Standby
operation)
High limit alarm
SPAN (EUS)의 ±100 %
Maximum
6 Low limit alarm
7
High/low
limit alarm
SPAN (EUS)의 0~100 %
8 In range alarm Minimum
9
Absolute setting
High limit alarm
Same as input range
(EU 0 ~ 100 %)
Maximum
10 Low limit alarm Minimum
11
Absolute setting
(Standby
operation)
High limit alarm Maximum
12 Low limit alarm Minimum
13 SV High limit alarm Maximum
14 SV Low limit alarm Minimum
15 LBA alarm - -
16 FAIL alarm - -