HANYOUNG NUX MC9 Series Скачать руководство пользователя страница 28

Страница: 28 / 45

Multi Channel T

emper

atur
e c
ontr

oller

①

②

⑤

⑥

⑦

⑪

⑩

⑨

⑧

③

④

①

②

⑤

⑥

⑦

⑪

⑩

⑨

⑧

③

④

①

②

⑤

⑥

⑦

⑪

⑩

⑨

⑧

③

④

█

When setting all set values (SV) at once

When to set the channel setting value (SV) of 1-8 corresponding to Zone “1” from 0 ℃ to 200 ℃ all at once

1.  •  If the ENT key is pressed in the PV/SV display state,
the screen on as the left is displayed
•  press CH key. "A" is displayed after the number on the
  CH display, and "- - - -" is displayed on the
  set value (SV) display.

2. • The letter "A" here stands for batch setup.
•  Each time the CH key is pressed, the channel number
  changes as follows.
  1-2-3-4-5-6-7-8-A

3. • Press the

100

120

91.5

+0.8-0.0

91.5

+0.8-0.0

①

②

⑤

⑥

⑦

⑪

⑩

⑨

⑧

③

④

key to move the cursor to the 100th position,

press the

100

120

91.5

+0.8-0.0

91.5

+0.8-0.0

①

②

⑤

⑥

⑦

⑪

⑩

⑨

⑧

③

④

key twice to set it to 200, press the

100

120

91.5

+0.8-0.0

91.5

+0.8-0.0

①

②

⑤

⑥

⑦

⑪

⑩

⑨

⑧

③

④

key to

register the SV value of all channels as 200 at the same time.
• The parameters are replaced by the following parameters.

When this process is completed, the set value (SV) of unused channels is also set in batches.

caution

Содержание MC9 Series














































Результаты поиска

Содержание MC9 Series

Отзывы:

HANYOUNG NUX MC9 Series, Руководство по эксплуатации, Страница: 28 / 45

Результаты поиска

Содержание MC9 Series

Отзывы: