5
Be
for
e s
tart
Ins
tall
Oper
ation
Func
tion
Communic
ation
5
Be
for
e s
tart
Ins
tall
Oper
ation
Func
tion
Communic
ation
5
Be
for
e s
tart
Ins
tall
Oper
ation
Func
tion
Communic
ation
BEFORE using this device, read this manual and save for future reference.
Signal words are used in this manual and apply to hazards or unsafe practices which could result in injury or
property damage See the information below for definitions of the signal words.
▍
Safety Precautions
Danger
Danger indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
Warning
Warning indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Caution
Caution indicates a potentially hazardous situation which, if not avoided, may result in
property damage or minor injury or both.
•
This product operates at 100 – 240 V a.c., 50/60 Hz without any additional operation.
If you use a power source other than the rated power, there is a risk of electric shock and fire.
•
Do not touch with wet hands.
•
Do not earth the unit to a gas pipe, lightning conductor or telephone etc. There is a risk of explosion and fire.
Danger
Warning
•
If there is a risk of a serious accident due to a malfunction or abnormality of this device, install an
appropriate external protection circuit.
•
For the protection and safety of this device and the system used in connection with this device, please follow the
safety precautions in this manual.
•
In case of use or handling not in accordance with the instructions of the user manual, or any safety and loss
caused by negligence etc. HANYOUNGNUX is not responsible.
•
For the protection and safety of this device and the system used in connection with this device, the separate
protection or safety circuit must be install it outside.
•
Do not disassemble, repair, or modify arbitrarily. It may result in electric shock, fire or failure.
•
Do not subject product to severe physical shock. It may result in damage on the device or failure.
•
When wiring, turn off the power to all instruments before wiring.
•
When using, follow basic precautions to reduce the risk of fire, electric shock and injury.
•
For installation and use, follow only as specified in the operate manual.
•
There is a risk of electric shock while energized, so do not touch the terminals.
Caution
•
Before turning on the power, do a third-class grounding. (ground resistance less than 100 Ω)
•
Do not supply power until the connection between devices of this product is completed.
•
Do not block the heat sink on this product. It may cause malfunction.
•
Install a switch on the power line to disconnect this device from the main power.
•
Connect a fuse of about 0.5 A to the power line.
•
Use it in places with elevation below 2000 m.
•
Do not wipe this unit with organic solvents such as alcohol or benzene. (Wipe with a neutral detergent.)
•
Use in a place free from wather, oil, chemicals, steam, dust, salt, iron, etc.
