Multi Channel T
emper
atur
e c
ontr
oller
30
To change “memory area 1” to “memory area 2”
1) When the
8
74
26
100
12
0
120
91.5
+0.8-0.0
91.5
+0.8-0.0
96
96
①
②
⑤
⑥
⑦
⑪
⑩
⑨
⑧
③
④
key is pressed in the PV/SV display mode, the SV (set value) change mode is displayed.
2) Press the
8
74
26
100
12
0
120
91.5
+0.8-0.0
91.5
+0.8-0.0
96
96
①
②
⑤
⑥
⑦
⑪
⑩
⑨
⑧
③
④
key to display the ZONE (memory zone) change mode.
3) Press the
8
74
26
100
12
0
120
91.5
+0.8-0.0
91.5
+0.8-0.0
96
96
①
②
⑤
⑥
⑦
⑪
⑩
⑨
⑧
③
④
key to set "2", press the
8
74
26
100
12
0
120
91.5
+0.8-0.0
91.5
+0.8-0.0
96
96
①
②
⑤
⑥
⑦
⑪
⑩
⑨
⑧
③
④
key to save the new value.
█
Changing memory area by front key operation
Terminal number
Memory area number
1
2
3
4
5
6
7
8
39 - 43 (COM)
OFF
ON
OFF
ON
OFF
ON
OFF
ON
40 - 43 (COM)
OFF
OFF
ON
ON
OFF
OFF
ON
ON
41 - 43 (COM)
OFF
OFF
OFF
OFF
ON
ON
ON
ON
DI1
DI2
DI3
SET
COM
39
40
41
42
43
█
Memory area change by external contact input (option)
Select the memory zone according to ON/OFF of external contact input terminals 39 ~ 43.
The memory zone number is selected by the external contact input terminals 39 to 42,
and the memory zone number is stored when the contact numbers 42 and 43 (D.I SET) change from OFF to ON.
█
Operation/Stop selection by external contact input (D.I) (option)
To change the memory area, there is a method by operating the front key in addition to the method
by external contact input (option) and communication (option). The method by external contact input and the
method by front key operation are as follows.
For the method of selection by communication (optional), refer to the communication manual.
█
Changing the control memory zone
First, select “1 (Use D.I)” for the function mode “D.I selection” parameter, and then press the front
8
74
26
100
12
0
120
91.5
+0.8-0.0
91.5
+0.8-0.0
96
96
①
②
⑤
⑥
⑦
⑪
⑩
⑨
⑧
③
④
key
in the operation screen (display current temperature).
Press to turn on the external contact input (No. 37-38) when “
” is displayed on the PV display
window to display the current temperature on the PV display window. This state is the RUN state.
Also, when the external contact input is turned OFF, “
” is displayed on the PV display window and
the operation is stopped.In other words, whenever the front
8
74
26
100
12
0
120
91.5
+0.8-0.0
91.5
+0.8-0.0
96
96
①
②
⑤
⑥
⑦
⑪
⑩
⑨
⑧
③
④
key is pressed when the external contact
input is ON and in the running state, the run/stop state is repeated.
█
Run/Stop selection by front key operation
First, select “0 (DI not used)” in the function mode “DI selection” parameter and press the front
8
74
26
100
12
0
120
91.5
+0.8-0.0
91.5
+0.8-0.0
96
96
①
②
⑤
⑥
⑦
⑪
⑩
⑨
⑧
③
④
key on the
operation screen (display current temperature) to display “
” (stop) and current temperature (RUN).
Is displayed on the PV display and the operation/stop status is repeated.
