![background image](http://html2.mh-extra.com/html/hantle/t4000/t4000_operators-manual_3703919050.webp)
Section 3: Programming
Operator Manual
T
4000™
(Rev 1)
© Hantle 2010
3.32
3.6 TCP/IP SETUP
TCP/IP Setup is done in several menus. First you need to specify TCPIP from the
Communications Menu: [See page 3.24] Check with your processor for which
protocol they are expecting.
Once you change from Modem, to one of the TCP/IP settings, several other menus
change to support various network functions.
Operator Function Menu
Æ
Host Setup
Æ
Processor IP and Address Port
Here you will set the Host Processor IP (or URL) address and port. For some
processors an IP address (example = 121.212.1.21) is used and for others you’ll
enter a URL address (example = trans.mybank.processor).
In addition to the address, there will also be a port setting (example = 6543)
Configuration Schedule allows you to force the ATM to update configuration with the
host upon boot up. You might use this command if the terminal gets consistent Key
Errors and you want to force download of a new working key.
Содержание T4000
Страница 1: ...Operator Manual Hantle T4000 Hantle Inc...