![background image](http://html2.mh-extra.com/html/hantle/t4000/t4000_operators-manual_3703919019.webp)
Section 3: Programming
Operator Manual
T
4000™
(Rev 1)
© Hantle 2010
3.1
SECTION 3: PROGRAMMING
3.1 INITIAL SETUP
3.1.1 ACCESSING THE OPERATOR FUNCTION
Step 1
To access the Operator Menu, press the following keys in order [ENTER] – [CLEAR] –
[CANCEL] – [1] – [2] – [3].
Note:
The Operator Function menu can only be accessed when the machine is either
in service (“insert your card” screen) or out of service. If the machine is attempting
to connect to the host or initializing, you will not be able to use the key commands to
access the Operator Function Menu.
If you have trouble accessing the Operator Menu, power off the ATM and then either
open the vault door or remove the paper from the printer and power back on. This
will force the ATM to the Operator Menu.
Step 2
Once you successfully completed the key
combination, you will be prompted to enter a
password. There are 3 levels of passwords.
x
Operator Password (allows access to basic
menu structure)
x
Service Password (allows access to basic
and diagnostic menus)
x
Master Password (allows access to all
menus including setup parameters)
You must press the ENTER key after
typing the password!
Passwords are very important to maintaining
security for your ATM. Your
dealer/distributor will provide you with
default password information.
WARNING:
Hantle USA, Inc. highly recommends changing your
passwords from default as soon as possible. Keep all passwords safe and
restrict access to non-authorized personnel.
Passwords MUST be 6 digits in length, use of anything other than a 6 digit
password may cause the passwords to revert back to factory default.
Содержание T4000
Страница 1: ...Operator Manual Hantle T4000 Hantle Inc...