![background image](http://html2.mh-extra.com/html/hantle/t4000/t4000_operators-manual_3703919032.webp)
Section 3: Programming
Operator Manual
T
4000™
(Rev 1)
© Hantle 2010
3.14
3.3.4 ISO 1, 3 EN/DISABLE
The ISO Tracks are the three tracks available for the card swipe head to read. The
ATM is already defaulted to read from Track #2 (which is why it’s not shown). This
parameter should not be changed. Changing the ISO tracks can cause the ATM to
not read cards properly.
3.3.5 CHANGE PASSWORDS
The ATM uses three passwords to provide security to the operator menu system.
These are Operator, Service and Master.
x
Operator Password (allows access to basic menu structure)
x
Service Password (allows access to basic and diagnostic menus)
x
Master Password (allows access to all menus including setup parameters)
The operator password can be changed by anyone with the current operator
password. The service and operator passwords can be changed by anyone with the
service password. The master password can only be changed by someone with the
current master password. Any password can be changed using the master
password.
For example, if you have lost the operator or service password, you can use your
master password to change them. Simply enter the master password when it
requests the operator or service password and then enter the new password.
You are required to change the master password from default before the ATM can go
in service.
Содержание T4000
Страница 1: ...Operator Manual Hantle T4000 Hantle Inc...